7.3
7.3.1
Prerequisites
Checking the oil
level
S
Maintenance manual
GMK5250L
Engine
•
In addition, carry out the additional maintenance work as specified in the
Engine manufacturer's documentation supplied with the vehicle.
•
At the first oil change, fit a drain valve in place of the drain plug;
à
p. 7 - 14.
Checking the oil level
– The truck crane must be level.
•
Start the engine from the driver's cab;
Risk of damage to the engine if the oil pressure is too low.
Switch off the engine immediately if the symbol (1) is displayed. The engine
can be damaged by running it when the oil pressure is too low.
•
Start the engine and watch the symbol (1).
•
Stop the engine immediately if the symbol does not disappear after
10 seconds.
If symbol (1) is displayed, the oil pressure is too low.
•
Allow the engine to run at idling speed for 2 - 3 minutes.
•
Switch off the engine.
•
Check the oil level after approx. 2 minutes.
3 302 744 en
Maintenance work on the carrier
à
Operating manual .
7.3 Engine
D
s
7 - 11
Need help?
Do you have a question about the Grove GMK 5250L and is the answer not in the manual?