Setting Messages To Be Written To The Measured Data; Setting Other Engineering Mode Items - YOKOGAWA DAQSTATION DX100P Operation Manual

Setting Messages to Be Written to the Measured Data.

DX100P
DX100P

Setting Other Engineering Mode Items

DX100P
Tag, Moving average*, Alarm delay time
IM 04L05A01-02E
1.
Press the Next #/# soft key
2.
On the DX100P, press the
The message screen is displayed.
3.
Set each item.
Group number: 1 to 7
Group name
Up to 16 characters
1 to 8 (messages)
Up to 32 characters
4.
Press DISP/ENTER.
The settings are confirmed.
5.
Press ESC.
The screen returns to the engineering mode menu.
1.
On the engineering mode menu, press the
be entered to display the setting screen.
2.
Set each item.
3.
Press DISP/ENTER
4.
Press ESC to return to the engineering mode menu.
Below are screens used to set the tag for each channel, the display update rate (see
page 6), auto save interval (see page 6), and the name of the directory in which
measured data is to be saved.
Tag
Up to 16 characters
* "Filter" for the DX102P, DX104P, DX204P, and DX208P.
"Moving average" for the DX106P, DX112P, DX210P, DX220P, and DX230P.
Setting Conditions and Making Measurements
to show the menu with [Message].
#4 soft key. On the DX200P, press the
DX200P
DX200P
soft key
to confirm the settings.
DX200P
#7 soft key.
corresponding to the item to
Tag, Filter*, Alarm delay
29