Change List Position - Konica Minolta CM-M6 Instruction Manual

Change List Position

… „
Specifying sample numbers allows for specified sample to be selected without the need to scroll the screen.
Setting Procedure Start the procedure from the <Sample menu> - <Data management> screen.
1
Use [] or [] to move the cursor to "Change list
position", and then press the [Confirmation] key.
The <Change list position> screen is displayed.
2
 and  will be displayed above and below the data
number. Use [] or [] to specify a value. Use []
or [] to move between digits.
3
Press the [Confirmation] key.
The selection is confirmed and the screen returns to the
<Sample> screen.
If [ESC] is pressed without pressing the [Confirmation]
Notes
key, the settings will not be changed and the screen will
return to the <Data management> screen.
Numbers with no measurement data cannot be selected.
Notes
Sample
0002 TARGET-2
Sample menu [0013]
Data management
Delete data
Set Sample as Target
Change Target reference
0002 TARGET-2
Change list position
Sample
0002 TARGET-2
Sample menu [0013]
Data management
Change list position
Delete data
0010: TARGET-10
2016/8/25 16:18:04
Set Sample as Target
0 1 0 / 0 1 3
Change Target reference
0002 TARGET-2
Change list position
3
64