X85; „ Screen Brightness - Konica Minolta CM-M6 Instruction Manual

Screen Brightness
… „
The brightness of the LCD can be set in five levels.
Screen brightness is set to "3 (Standard)" under the initial settings.
Memo
Operating Procedure Start the procedure from the <Setting> - <Instrument setup> screen.
1
Use [] or [] to move the cursor to "Brightness",
and then press the [Confirmation] key.
The <Brightness> setting screen is displayed.
2
Use [] or [] to move the cursor to the desired
brightness.
Settings
5 (Light)
4
3 (Standard)
2
1 (Dark)
3
Press the [Confirmation] key to confirm, and then
press [ESC].
The selection is confirmed and the screen returns to the
<Instrument setup> screen.
If [ESC] is pressed without pressing the [Confirmation]
Notes
key, the settings will not be changed and the screen will
return to the <Instrument setup> screen.
Sample
0002 TARGET-2
Setting
Instrument setup
Brightness
3
Direction
Beep
ON
Measurement button
ON
Sample
0002 TARGET-2
Setting
Brightness
Instrument setup
Brightness 5
3
4
[ ]
Direction 3
2
Beep
1
ON
3
92