Measurement Angle - Konica Minolta CM-M6 Instruction Manual

Measurement Angle

… „
Select the measurement angle.
All six measurement angles are set under the initial settings.
Memo
Operating Procedure Start the procedure from the <Measurement cond.> - <Measurement setup> screen.
1
Use [] or [] to move the cursor to "Measurement
angle", and then press the [Confirmation] key.
The <Measurement angle> screen is displayed.
2
Use [] or [] to move the cursor to the
measurement angle to be set, and then press the
[Confirmation] key. Measurement will be performed
only at the specified angle.
Selections
-15°
{ „
15°
{ „
25°
{ „
45°
{ „
75°
{ „
110°
{ „
3
After selecting the angle, use [] or [] to move the
cursor to "ON", and then press the [Confirmation]
key.
The selection is confirmed and the screen returns to the
<Measurement setup> screen.
• If [ESC] is pressed without pressing the
Notes
[Confirmation] key, the settings will not be changed
and the screen will return to the previous screen.
• Be sure to select at least three angles.
Sample
Measurement cond.
Measurement setup
Measurement angle
Auto average
1 Times
Manual average
1 Times
Manual average option
Manual save
Sample
Measurement cond.
Measurement angle
-15°
Measurement setup
15°
25°
Measurement angle
45°
75°
110°
Auto average
Manual average
Manual average
OK Cancel
Manual save
3
68