Communication Setup; X85; „ Usb Host - Konica Minolta CM-M6 Instruction Manual

Communication Setup

„ „
Performing settings for communication between CM-M6 and external devices.
Turn ON the Bluetooth function and configure the meter PIN code.
Operating Procedure
1
Press [MENU], and then use [] or [] to display the
<Setting> screen.
To return to the previous screen, press the [MENU] or [ESC].
Memo
2
Use [] or [] to move the cursor to
"Communication setup", and then press the
[Confirmation] key.
The <Communication setup> screen is displayed.
USB Host
… „
This setting must be set to "ON" in order to use the instrument via Bluetooth.
The USB host is set to "OFF" under the initial settings.
Memo
Operating Procedure
1
Use [] or [] to move the cursor to "USB host",
and then press the [Confirmation] key.
The <USB host> screen is displayed.
105
Start the procedure from the measurement screen.
Start the procedure from the <Setting> - <Communication setup> screen.
Sample
0002 TARGET-2
Setting
Default data setup
Calibration setup

Communication setup

Instrument setup
Diagnosis info.
Sample
0002 TARGET-2
Setting
Communication setup
Auto print
OFF
USB host
OFF
Meter PIN code
0000
Printer address
000000000000
Sample
0002 TARGET-2
Setting
Communication setup
Auto print
OFF
USB host
OFF
Meter PIN code
0000
Printer address
000000000000