Connecting To A Printer; Connecting Via Usb Cable - Konica Minolta CM-M6 Instruction Manual

Connecting to a Printer

„ „
This instrument can be connected to a printer using a USB cable or the Bluetooth function, enabling printing of a
variety of data including measurement results.

Connecting via USB Cable

… „
To connect the instrument to the printer, use the USB cable for the printer.
The USB communication port of the instrument conforms to USB 2.0.
Memo
• Be sure to turn OFF the power of both the instrument and printer before connecting them.
Notes
• Make sure that the USB connector plug is oriented correctly and connected securely.
• When connecting/disconnecting the USB cable, be sure to hold the connector plug. Do not pull on or
forcibly bend the cable. Otherwise, wire breakage may result.
• Make sure that the cable has sufficient length. Putting tension on the cable may cause connection failure or
wire breakage.
• Firmly push in the USB cable connector that matches the shape of the port (connection terminal) until it can
go in no further.
• When connected to a printer, make sure that the instrument is connected to the AC adapter or that lithium-
ion battery is inserted.
• Using a printer other than the optional accessory printer may result in incorrect operation.
• The optional accessory printer can only print text.
Operating Procedure
1
Turn the instrument power OFF.
2
Connect the A connector (female) of the USB cable
to A connector (male) of the USB converter cable.
3
Open the connector's protective cover, and connect
the Micro-A connector of the USB converter cable to
the USB port (Micro-AB) on the instrument.
‹ Fully insert the connector and ensure the connection is ‹
secure.
4
Connect the miniB connector of the USB cable to the
USB port on the printer.
5
Turn the printer ON.
6
Set the instrument's "USB host" setting to "OFF".
For information on configuring the "USB host", refer to page
Memo
105.
4
108