Manual Average Option; Tilt Detection - Konica Minolta CM-M6 Instruction Manual

Manual Average Option

… …
Select the save method when performing manual averaging.
Operating Procedure
1
Use [] or [] to move the cursor to "Manual
average option", and then press the [Confirmation]
key.
The <Manual average option> screen is displayed.
2
Use [] or [] to move the cursor to "Manual save"
or "Auto save", and then press the [Confirmation]
key.
Selections
Manual save
{ …
Auto save
{ …
3
Press the [Confirmation] key to confirm, and then
press [ESC].
The selection is confirmed and the screen returns to the
Notes
previous screen.

Tilt Detection

… …
This instrument features a warning function that alerts users if the instrument is tilted beyond the measurement
range.
Turning this function ON will cause a warning to appear if the instrument is tilted at an angle that cannot be
corrected.
Tilt detection is set to "ON" under the initial settings.
Memo
Operating Procedure
1
Use [] or [] to move the cursor to "Tilt
detection", and then press the [Confirmation] key.
The <Tilt detection> screen is displayed.
71
Start the procedure from the <Measurement cond.> - <Measurement setup> screen.
Start the procedure from the <Measurement cond.> - <Measurement setup> screen.
Sample
Measurement cond.
Measurement setup
Manual average option
Measurement angle
Manual save
Auto save
Auto average
Manual average
Manual average option
Manual save
Sample
Measurement cond.
Measurement setup
Tilt detection
OFF