Observer/Illuminant 2 - Konica Minolta CM-M6 Instruction Manual

Observer/Illuminant 2

… „
Select the secondary illuminant used for MI (metamerism index) calculation, etc.
Observer/Illuminant 2 is set to "None" under the initial settings.
Memo
Operating Procedure Start the procedure from the <Measurement cond.> - <Observer/Illuminant> screen.
1
Use [] or [] to move the cursor to "Observer/
Illuminant 2", and then press the [Confirmation] key.
The <Observer/Illuminant 2> screen is displayed.
2
Use [] or [] to move the cursor to the desired
item.
Settings
The setting values are the same as those for "Observer/
{ „
Illuminant 1" and "None".
3
Press the [Confirmation] key.
The selection is confirmed and the screen returns to the
<Observer/Illuminant> screen.
If [ESC] is pressed without pressing the [Confirmation]
Notes
key, the settings will not be changed and the screen will
return to the <Observer/Illuminant> screen.
Sample
Measurement cond.
Observer/Illuminant
Observer/Illuminant 1
10°/D65
Observer/Illuminant 2
None
Sample
Measurement cond.
Observer/Illuminant 2
10°/C
Observer/Illuminant
10°/D50
10°/D65
Observer/Illuminant 1
10°/F2
10°/D65
10°/F6
10°/F7
Observer/Illuminant 2
10°/F8
None
10°/F10
10°/F11
10°/F12
10°/User
None
3
74