Print - Konica Minolta CM-M6 Instruction Manual

Print

„ „
This function can be used to print measurement data. The instrument must be connected to the serial printer in
advance. For instructions on how to connect the instrument to a serial printer, refer to page 108 "Connecting to a
Printer".
• If a proper connection is not established, printing will not be possible.
Notes
• Even if the connection has been correctly established, printing may fail for reasons such as the printer being
turned off when printing is attempted.
Display the sample to be printed on the <Sample> screen in advance.
Setting Procedure
1
Use [] or [] to move the cursor to "Print data",
and press the [Confirmation] key. Printing will begin
from the connected printer.
When printing is complete, the screen returns to the
<Sample> screen.
The <Print> screen is displayed even when data will not
Notes
be printed properly due to an improper printer
connection or other problem.
59
Start the procedure from the <Sample menu> screen.
Sample
0002 TARGET-2
Sample menu [0013]
Print data
Edit name
No Name
Data management