Measurement Button
Operation of the measurement button can be turned ON or OFF.
The measurement button setting is set to "ON" under the initial settings.
Memo
Operating Procedure
1
Use [] or [] to move the cursor to "Measurement
button", and then press the [Confirmation] key.
The <Measurement button> setting screen is displayed.
2
Use [] or [] to move the cursor to ON or OFF.
Settings
OFF (Disabled)
{
ON (Enabled)
{
3
Press the [Confirmation] key to confirm, and then
press [ESC].
The selection is confirmed and the screen returns to the
<Instrument setup> screen.
If [ESC] is pressed without pressing the [Confirmation]
Notes
key, the settings will not be changed and the screen will
return to the <Instrument setup> screen.
95
Start the procedure from the <Setting> - <Instrument setup> screen.
Sample
0002 TARGET-2
Setting
Instrument setup
Brightness
3
Direction
Beep
ON
Measurement button
ON
Sample
0002 TARGET-2
Setting
Instrument setup
Measurement button
Brightness
OFF
3
ON
Direction
Beep
ON