Direction - Konica Minolta CM-M6 Instruction Manual

Direction

… „
The direction is set to "Double-Path" when the instrument is shipped from the factory.
Memo
Operating Procedure
1
Use [] or [] to move the cursor to "Direction",
and then press the [Confirmation] key.
The <Direction> screen is displayed.
2
Use [] or [] to move the cursor to the desired
direction.
Selections
Double-Path
{ „
Left
{ „
Data obtained with "Left" selected may have lower
Memo
performance than data with "Double-Path" selected.
Moreover, measuring with "Left" selected requires the use of
a sample with a flat measurement surface, and the
instrument must not be tilted when measurement is
performed.
3
Press the [Confirmation] key to confirm, and then
press [ESC].
The selection is confirmed, and the screen returns to the
previous screen.
If [ESC] is pressed without pressing the [Confirmation]
Notes
key, the settings will not be changed, and the screen will
return to the <Display cond.> screen.
79
Start the procedure from the <Measurement cond.> - <Display cond.> screen.
Sample
Measurement cond.
Display cond.
Display type
Color space
L*C*h
Equation
CMC
Direction
Double-Path
Sample
Measurement cond.
Display cond.
Direction
Display type
Double-Path
Left
Color space
L*C*h
Equation
CMC
Direction
Double-Path