Table of Contents
Advertisement
Edit Name
„
„
Name the sample data.
Display the name of the sample to be edited on the <Sample> screen in advance.
Setting Procedure
Start the procedure from the <Sample menu> screen.
1
Use [] or [] to move the cursor to "Edit name",
and then press the [Confirmation] key.
The <Edit name> screen is displayed.
2
Use []/[] or []/[] to move the cursor
between characters, and then press the
[Confirmation] key.
• Up to 16 characters can be used.
• The selected character is displayed in the text box.
3
2
Repeat step
until the necessary characters have been entered.
• To delete the character to the left of the cursor in the text
box, move the cursor to [
[Confirmation] key.
4
After inputting the characters, move the cursor to
[OK] and press the [Confirmation] key.
The setting is confirmed and the screen returns to the
<Sample> screen.
If [ESC] is pressed during configuration, or if the cursor is
Memo
moved to "Cancel" and the [Confirmation] key is pressed,
the settings will not be changed and the screen will return to
the <Sample menu> screen.
] and press the
×
Sample
0002 TARGET-2
Sample menu [0013]
Print data
Edit name
No Name
Data management
0002 TARGET-2
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
.
_
(
)
ABC/abc/123
OK
Cancel
3
60
Advertisement
Table of Contents
Troubleshooting
