White Calibration Cap; X85; „ Attaching To/Removing From Instrument - Konica Minolta CM-M6 Instruction Manual

White Calibration Cap

„ „
The white calibration cap is attached the instrument when performing white calibration.
• Make sure the white calibration cap being used includes the same serial No. as that of the instrument being
Notes
used.
• When the white calibration cap is not in use, keep the white calibration plate away from external light and
dust by taking such measures as placing the cap pointed downward.
• When the instrument is not in use, be sure to attach the white calibration cap before storing to prevent dust
and the like from entering the specimen measuring port.
White calibration cap nameplate
Attaching to/Removing from Instrument
… „
Attaching the White Calibration Cap
1
Hold the instrument securely.
2
Align the notches on the outer circumference of the
white calibration cap as shown in the diagram, and
push on the white calibration cap until a "click" is
heard and the specimen measuring port of the
instrument is covered.
Hold the white calibration cap attached to the
Notes
instrument and do not allow the instrument to move.
Doing so may cause the instrument to become
separated from the white calibration cap and fall, which
may damage the instrument.
Removing the White Calibration Cap
1
While holding down the white calibration cap
release button, pull the instrument straight up to
remove it from the white calibration cap.
Instrument nameplate
Serial No.
MENU
ESC
MENU MENU
ESC ESC
20
1