Connecting The Instrument To A Pc - Konica Minolta CM-M6 Instruction Manual

Connecting the Instrument to a PC

{ „
With the PC as a host, a connection to the instrument can be established using Bluetooth communication.
Operating Procedure
1
Verify that the instrument power has been turned
ON.
2
Verify that the instrument's Bluetooth function has
been turned ON. Also make sure the Bluetooth
function is not being used to connect to a printer
and that the USB cable is not being used to connect
to the PC.
3
Start the Bluetooth utility on the PC.
4
Search for nearby Bluetooth devices, and select
"CM-A219" from the list of displayed devices.
5
Enter the PIN code for the instrument (refer to step 4
on page 106) on the PC.
6
Open the Bluetooth serial port to connections.
Once the connection has been established, the remote icon
will be displayed in the status bar on the instrument.
107
Sample
0002 TARGET-2
Setting
Communication setup
Auto print
OFF
USB host
ON
Meter PIN code
0000
Printer address
000000000000