Auto Print - Konica Minolta CM-M6 Instruction Manual

Auto Print

… „
Measurement results can be automatically printed for every measurement.
• The instrument must be connected to the printer in advance.
Notes
• The optional accessory Bluetooth printer CM-A234 can only print text. Difference graphs and other selected
graphs displayed on the instrument cannot be printed.
Auto print is set to "OFF" under the initial settings.
Memo
Operating Procedure Start the procedure from the <Setting> - <Communication setup> screen.
1
Use [] or [] to move the cursor to "Auto print",
and then press the [Confirmation] key.
The <Auto print> screen is displayed.
2
Use [] or [] to move the cursor to "ON", and then
press the [Confirmation] key.
The Auto Print function will turn ON, and printing will be
performed every time measurement is performed. After the
settings have been configured, the display will return to the
<Communication setup> screen.
Print Example 1
Measurement Data / Color Difference Target Color Data output
S/N 0123456
SAMPL D001 FAIL
(SAMPLE name)
10/D65 FF 99.99
L* a*
-15 30.12 10.09
15 31.23 11.98
25 32.34 12.87
45 33.45 13.76
75 34.56 14.65
110 35.67 15.54
2014/01/01 09:00:00
T001 (TARGET name)
Print Example 2
Color Difference Data output
S/N 0123456
SAMPL D001 FAIL
(SAMPLE name)
10/D65 FF 99.99
dE*ab
-15 0.1
15 0.1
25 0.1
45 0.1
75 0.1
110 0.1
dL* da* db*
-15 30.12 10.09 1.00
x
15 31.23 11.98 w 2.11
25 32.34 12.87 3.22
x
45 33.45 13.76 4.33
75 34.56 14.65 5.44
x
110 35.67 15.54 6.55
2014/01/01 09:00:00
T001 (TARGET name)
Serial No.
Measurement Data / Color Difference Target Color Data, Pass/Fail Result
Measurement Data / Color Difference Target Color Data name
Observer/Illuminant 1, FF value
Color space (L*a*b* / L*C*h)
b*
1.00
2.11
3.22
Display showing only values for selected angles
4.33
5.44
6.55
Measurement date/time
Target reference information
Serial No.
Measurement Data / Color Difference Target Color Data
Measurement Data / Color Difference Target Color Data name
Observer/Illuminant 1, FF value
Color space
Display showing only values for selected angles
If the color difference result is "Fail", an "×" will be printed after the value. If the
Memo
value approaches the tolerance, "w" is appended after the value (refer to page 56
for more on warning levels).
Measurement date/time
Target reference information
Sample
0002 TARGET-2
Setting
Communication setup
Auto print
OFF
USB host
OFF
Meter PIN code
00000000
Printer address
000000000000
4
114