Protect Data - Konica Minolta CM-M6 Instruction Manual

Protect Data

… „
Data protection can be specified so that the saved target color settings will not be deleted or changed by accident.
When the data protection is set, you cannot select "Edit name", "Edit tolerance", "Delete data" or "Delete all data"
on the <Target menu> screen.
Protect data is set to "OFF" under the initial settings.
Memo
Operating Procedure Start the procedure from the <Target menu> - <Data management> screen.
1
Use [] or [] to move the cursor to "Protect data",
and then press the [Confirmation] key.
The <Protect data> screen is displayed.
2
Use [] or [] to move the cursor to the desired
item.
Settings
OFF : Do not protect the data.
{ „
ON : Protect the data.
{ „
3
Press the [Confirmation] key.
The selection is confirmed and the screen returns to the
<Data management> screen.
If [ESC] is pressed without pressing the [Confirmation]
Notes
key, the settings will not be changed and the screen will
return to the <Data management> screen.
Target
Target menu [0002]
Data management
Delete data
Change list position
Protect data
OFF
Delete all data
Target
Target menu [0002]
Data management
Protect data
Delete data
OFF
ON
Change list position
Protect data
OFF
Delete all data
3
52