Equation - Konica Minolta CM-M6 Instruction Manual

Equation

… „
Select the color difference equation to be used.
The color difference equation is set to "ΔE00" under the initial settings.
Memo
Operating Procedure Start the procedure from the <Measurement cond.> - <Display cond.> screen.
1
Use [] or [] to move the cursor to "Equation",
and then press the [Confirmation] key.
The <Equation> screen is displayed.
2
Use [] or [] to move the cursor to the desired
equation.
Selections
ΔE*ab : ΔE*ab (CIE1976) color difference
{ „
equation
CMC : CMC color difference equation;
{ „
Parameters can be changed.
ΔE*94 : ΔE* (CIE1994) color difference
{ „
equation; Parameters can be changed.
ΔE00 : ΔE2000 (CIE DE2000) color difference
{ „
equation; Parameters can be changed.
ΔEc (DIN6175) : ΔEc (DIN 6175-2) color difference
{ „
equation
ΔEp (DIN6175) : ΔEp (DIN 6175-2) color difference
{ „
equation
ΔE99o : ΔE99o (DIN99o) color difference
{ „
equation
3
Press the [Confirmation] key to confirm, and then
press [ESC].
The selection is confirmed and the screen returns to the
previous screen.
If [ESC] is pressed without pressing the [Confirmation]
Notes
key, the settings will not be changed and the screen will
return to the <Display cond.> screen.
Sample
Measurement cond.
Display cond.
Display type
Color space
L*C*h
Equation
CMC
Direction
Double-Path
Sample
Measurement cond.
Equation
∆E*ab
Display cond.
CMC
∆E*94
Display type
∆E00
∆Ec (DIN6175)
∆Ep (DIN6175)
Color space
∆E99o
L*C*h
Equation
CMC
3
78