Instrument Preparations; Registering A Bluetooth Address - Konica Minolta CM-M6 Instruction Manual

Instrument Preparations

{ „
Connecting the Bluetooth module to the instrument, and turn ON the instrument's Bluetooth function (USB host).
(Refer to page 105)

Registering a Bluetooth Address

… „
Operating Procedure
1
Use [] or [] to move the cursor to "Printer address", and then press the [Confirmation] key.
The <Printer address> screen is displayed.
2
Enter the address of the Bluetooth device to be connected.
3
After inputting the characters, move the cursor to [OK] and press the [Confirmation] key.
The printer will be registered as an I/O device for the instrument, and the display will return to the
<Communication setup> screen.
If [ESC] is pressed during configuration, or if the cursor is moved to "Cancel" and the [Confirmation] key is pressed,
Memo
the settings will not be changed, and the screen will return to the <Communication setup> screen.
111
Start the procedure from the <Setting> - <Communication setup> screen.
Sample
Communication setup
Auto print
Bluetooth
Meter PIN code
Printer address
Sample
0123456789AB
0 1 2 3 4 5
6
A B C D E F
0002 TARGET-2
Setting
ON
ON
0000
000000000000
0002 TARGET-2
Printer address
7 8 9
×
OK Cancel