User Type - Konica Minolta CM-M6 Instruction Manual

User Type

… „
Settings can be protected for each user.
The user type is set to "Administrator" under the initial settings.
Memo
Operating Procedure Start the procedure from the <Setting> - <Instrument setup> screen.
1
Use [] or [] to move the cursor to "User type",
and then press the [Confirmation] key.
The <User type> setting screen is displayed.
2
Use [] or [] to move the cursor and select the
user type.
Selections
Administrator : All settings can be changed.
{ „
Worker : Some settings cannot be changed.
{ „
The operations that workers can perform are as follows
Memo
• "Sample" browsing/measurement/printing/deletion
• "Target" browsing/printing
• Calibration
• Instrument info. displaying
• Change user type
3
Press the [Confirmation] key to confirm, and then
press [ESC].
The selection is confirmed and the screen returns to the
<Instrument setup> screen.
If [ESC] is pressed without pressing the [Confirmation]
Notes
key, the settings will not be changed and the screen will
return to the <Instrument setup> screen.
Sample
0002 TARGET-2
Setting
Instrument setup
User type
Administrator
Language
English
Date format
yyyy/mm/dd
Date & time
2016/08/25
Sample
0002 TARGET-2
Setting
Instrument setup
User type
User type
Administrator
Administrator
Worker
Language
English
Date format
yyyy/mm/dd
Date & time
2016/08/25
3
88