It does not protect against environmental impact such as shock, from rain or
snowfall.
6.7.9
Using the Y-Cable
The Y-cable is used for connecting the Vivo 3 to both mains and external DC at the
same time. see 5.3 Connecting the Vivo 3 to Power Supply, page 64. When both power sour-
ces are available, the mains will be used.
6.7.10 Using the Vivo 3 with the Trolley
This section describes how to use the Vivo 3 and a trolley with mounting bracket.
Mount and dismount the Vivo 3 as shown in the picture:
The bottom plate is mounted to the trolley using four screws.
Before mounting the bottom plate, the tilt bar must be dismounted:
86 How to Use the Vivo 3
Vivo 3 Clinician's Manual
1 2
1
Doc. 007232 Y-2