Transfer Data Using An Usb Cable; Basic Troubleshooting - Breas Vivo 3 Clinician Manual

6.8.3

Transfer Data using an USB Cable

WARNING!
The PC must be placed outside the patient area (i.e. more than 2 meters from the
patient).
1 Connect the USB cable to the
Vivo 3.
Make sure it is fitted correctly.
2 Connect the other end of the cable to the PC.
3 Start the software for viewing or retrieving data.
6.9

Basic Troubleshooting

Problem
The ventilator doesn't start.
The ventilator starts, but the patient cir-
cuit doesn't deliver any air.
The humidifier doesn't work properly.
Doc. 007232 Y-2
Action
Check the connection of the power cord
between the ventilator and the power
outlet.
Ensure that both ends of the patient cir-
cuit are correctly connected.
Straighten the patient circuit or replace it.
If the humidifier is incorrectly assembled,
disassemble it and then assemble it
correctly.
If the air is dry despite using the humidi-
fier, increase the level of humidification.
If the humidifier doesn't deliver any heat,
check that the Vivo 3 is powered from
the AC power supply; the humidifier
doesn't work on battery.
How to Use the Vivo 3 89
Vivo 3 Clinician's Manual