Prepare The Vivo 3 For Use; Checking The Vivo 3 Before First Use; Placing The Vivo 3 - Breas Vivo 3 Clinician Manual

5

Prepare the Vivo 3 for Use

5.1

Checking the Vivo 3 before First Use

Before using the Vivo 3, perform the following checks.
1 Ensure that you have the equipment mentioned in 3.1 Main Components, page 32
2 Ensure that the equipment is in good condition.
3 If stored more than 1 month, connect the Vivo 3 to the power supply to recharge
the internal battery.
4 Check that the air inlet filters are
installed.
5.2

Placing the Vivo 3

WARNING!
Read the chapter 2.3 Environment — Warnings and Precautions, page 20 carefully to make
sure all conditions are met and considered.
1 Place the Vivo 3 on a solid, flat sur-
face. The Vivo 3 should be placed
lower than the patient in order to
prevent the device from falling on
the patient, as well as preventing
condensed water from reaching the
patient.
Doc. 007232 Y-2
Prepare the Vivo 3 for Use 63
Vivo 3 Clinician's Manual