6
How to Use the Vivo 3
For a summary description of the means of initiating and terminating the inspiratory
phase in each mode of the ventilator, please refer to 4.1 Treatment Modes.
6.1
Switch On the Vivo 3
1
Make sure that the power supply is connected.
2 Press the On/Off button.
⇒The Vivo 3 is now in standby
mode with the display turned on.
6.2
Switch Between Clinical Mode and Home Mode
The Clinical mode gives access to all functions and settings, while the Home mode gives
access only to a limited set of functions and settings. Press and hold down the left and
right arrow buttons simultaneously for 3 seconds to switch modes.
6.3
Start the Treatment
WARNING!
Risk of Asphyxia or Personal Injury
Using incorrect settings may cause personal injury or severe medical conditions, such
as hypercarbia, producing arterial acidemia.
The therapy settings shall be based on a physician's description. Changes to settings
must be made by authorized clinical personnel only.
1
Make sure that the Vivo 3 is in Standby mode.
Doc. 007232 Y-2
How to Use the Vivo 3 69
Vivo 3 Clinician's Manual