Breas Vivo 3 Clinician Manual page 43

Setting
Display Light
Light Intensity
3.5.5.2 Pre-use Test
The pre-use test is performed using a guide in the graphical user interface.
3.5.5.3 Device Information
Information
Product name
Battery Percentage
Battery Time Left
Firmware version
Bootloader version
Board Revision
Interface Board Rev
3.5.5.4 Device Memory
Command
Save Memory Data on
Card
Erase Memory Data
Doc. 007232 Y-2
Description
Value range:
• On — Always lit at the selected intensity
• Auto — Always lit, with automatic adjustment of the
intensity with regards to the ambient light.
• Delayed — The display is dimmed after about 30 sec-
onds(time depends on usage mode and power source).
If any button is pressed or any alarm occurs, the display
is lit again.
Default value: On
Value range: 1 to 5
Default value: 5
Description
Battery charge level
Estimated remaining usage time on battery power
Technical information for service personnel
Technical information for service personnel
Technical information for service personnel
Technical information for service personnel
Description
Copies the memory data from the internal memory to the
memory card.
Erases memory data from the internal memory
Product Description 43
Vivo 3 Clinician's Manual