Breas Vivo 3 Clinician Manual page 68

1 Turn on the Vivo 3.
2 Press the Setup button.
3 Within the limits prescribed by the physician, adjust the settings for the best possible
breathing comfort for the patient.
If changing the treatment mode, always review and consider the other settings. The
new treatment mode may have additional settings specific for the mode.
4 Check that alarms can be received at the operator's position. For detailed informa-
tion, see 7.1 Operator's Position, page 91.
5 Make a copy of the Patient Settings Record on page 138 and document the settings.
The Vivo 3 is now ready for use. If restarting the Vivo 3, it will start with the settings
used when it was powered off.
68 Prepare the Vivo 3 for Use
Vivo 3 Clinician's Manual
Doc. 007232 Y-2