4.2.20 Heated Circuit; 4.2.21 Heated Circuit Level - Breas Vivo 3 Clinician Manual

4.2.20 Heated Circuit

This setting defines whether a heated patient circuit shall be used as patient circuit.
By default, this setting can be modified in Clinical mode only, but the Vivo 3 may be
configured to allow modification in home mode as well.
WARNING!
Read the section 2.7 Humidification and Heating — Warnings and Precautions, page 26
before activating the heated circuit, to make sure all conditions are met and
considered.
Property
Value range
Default value
Available in modes

4.2.21 Heated Circuit Level

This setting defines the heating level, if Heated Circuit is set to On.
By default, this setting can be modified in Clinical mode only, but the Vivo 3 may be
configured to allow modification also in home mode.
Property
Value range
Default value
Setting resolution
Available in modes
62 Treatment Functions and Settings
Vivo 3 Clinician's Manual
Description
• On
• Off
Off
All modes
Description
1 to 5
1
1
All modes
Doc. 007232 Y-2