Log Data; Transfer Data Using A Memory Card - Breas Vivo 3 Clinician Manual

6.8.1

Log Data

Data is stored in three different logs:
• Usage log, containing 1 year of data sampled and averaged every 24 hours. Data
include non-clinical events, physiological and technical alarms, and settings.
• Breath log, containing 1 month of data sampled every breath. Only sampled during
treatment. Data include clinical parameters.
• Detailed log, containing 24 hours of data sampled at 62.5 Hz. Only sampled during
treatment. Data include flow and pressure data. This log is stored directly on SD
card.
The log data is maintained when device is powered off or in case of power failure.
When logs are filled up, the oldest data will be discarded.
6.8.2

Transfer Data using a Memory Card

The Vivo 3 has an SD memory card slot at the back of the device.
1 Insert an SD card to the memory
card slot.
2 Open the Device Memory page.
Others > Device Memory
3 Select Save Memory Data on Card and press the right arrow button to start the
action.
⇒ The data transfer starts. When finished, a confirmation message is displayed.
The logs can be viewed in a PC with the Vivo PC Software installed.
4 Remove the memory card from the Vivo 3 and insert it to a memory card reader
connected to a PC with the Vivo PC Software installed.
5 Start the Vivo PC Software for accessing the data.
For detailed information about using the Vivo PC Software, see the software's help
file.
88 How to Use the Vivo 3
Vivo 3 Clinician's Manual
Doc. 007232 Y-2