Switch Off The Vivo 3; Monitor Treatment - Breas Vivo 3 Clinician Manual

2 Do one of the following:
6.5

Switch Off the Vivo 3

1 Make sure that the treatment is stopped and the Vivo 3 is in Standby mode.
2 Press the On/Off button.
⇒When the message "Do you want
to turn off the ventilator?" is dis-
played, confirm by pressing the
Mute Alarm button within 6 sec-
onds. Otherwise, the Vivo 3 will
revert to standby mode.
3 Press the Mute Alarm button.
⇒ The Vivo 3 is now turned off.
6.6

Monitor Treatment

1 Press the Monitor navigation button.
⇒The Monitor page is now displayed.
Doc. 007232 Y-2
• Press the Mute Alarm but-
ton (a). (Always available.)
• Press Ramp (b) for a
ramped stop. (Available if a
Ramp Down time has been
specified.)
a
How to Use the Vivo 3 71
Vivo 3 Clinician's Manual