Using The Spo Sensor - Breas Vivo 3 Clinician Manual

Activate the heated circuit
1 Press the Setup button twice.
⇒The second setup page is now displayed, with heated circuit settings.
2 Press the Up arrow button until the setting Heated Circuit is selected.
3 Press the Right arrow button to turn the heated circuit on.
⇒The value is shifted to On and the heated circuit symbol is lit on the display.
⇒The setting for Heated Circuit Level is displayed.
4 Press the Down arrow to select the Heated Circuit Level setting.
5 Press the Left arrow button to decrease the heating or the Right arrow button to
increase the heating.
6.7.3 Using the SpO
The SpO
ure functional oxygen saturation of arterial hemoglobin (SpO2) and pulse rate.
80 How to Use the Vivo 3
Vivo 3 Clinician's Manual
Sensor
2
module (consisting of a SpO
2
sensor, an electronic unit) is intended to meas-
2
Doc. 007232 Y-2