User Authentication Parameters; [Pr. Npb01_User Authentication And Authorization Setting]; [Pr. Npb04_User Name No.1]; [Pr. Npb05_Authorization Level No.1] - Mitsubishi Electric MELSERVO-J5 Series User Manual

5.2

User authentication parameters

[Pr. NPB01_User authentication and authorization setting]

Initial value
00000000h
Set the connection method to use for setting the user authentication parameter.
To enable this network parameter, cycle the power or reset the software after setting.
Setting value
0
1

[Pr. NPB04_User name No.1]

Initial value
user
Set the user name to use when accessing the FTP server function of the servo amplifier.
Set the user name in accordance with the following restrictions. If a blank (0 character) user name is set, that account will be
disabled.
Number of characters
1 to 32
If the set user name is identical to an existing account, password and authorization level parameters linked to said user name
may be disabled. Ensure that no duplicate user names are set.

[Pr. NPB05_Authorization level No.1]

Initial value
00000001h
Set the authorization level for the user (No.1).
Refer to the following table for details.
Network parameter No.
[Pr. NPB05.0]
[Pr. NPB05.1]
[Pr. NPB05.2]
[Pr. NPB05.3]
[Pr. NPB05.4]
[Pr. NPB05.5]
[Pr. NPB05.6]
[Pr. NPB05.7]
*1 Available on servo amplifiers with firmware version B2 or later.
Setting range
Refer to the text
Authorization
Full access possible
USB only
Setting range
32 characters
Type of characters
• Single-byte letters (uppercase)
• Single-byte letters (lowercase)
• Single-byte numeric characters
Setting range
Refer to the text
Setting digit (BIN)
_ _ _ x
_ _ x _
_ x _ _
x _ _ _
For manufacturer setting
Size
4 bytes
Description
The user authentication parameter can be set via either a USB or Ethernet
connection.
The user authentication parameter can only be set via a USB connection.
Size
36 bytes
Size
4 bytes
Description
Firmware update permission selection
0: Prohibited
1: Permitted
When "1" (permitted) is set, firmware updates can be performed via the FTP server
function.
For manufacturer setting
Drive recorder data readout permission selection
0: Prohibited
1: Permitted
When "1" (permitted) is set, readout of the recorded data in the drive recorder can be
performed via the FTP server function.
For manufacturer setting
For manufacturer setting
5 NETWORK PARAMETER DETAILS
Ver.
A5
Ver.
A5
Ver.
A5
*1
5.2 User authentication parameters
5
167