[Pr. Pd04_Input Device Selection 1H (*Di1H)]; [Pr. Pd05_Input Device Selection 2L (*Di2L)]; [Pr. Pd06_Input Device Selection 2H (*Di2H)] - Mitsubishi Electric MELSERVO-J5 Series User Manual

[Pr. PD04_Input device selection 1H (*DI1H)]

Initial value
00000202h
Select the device to be assigned to the input signal of the CN3-15 pin.
[Pr. PD04.0-1_Torque control mode - Device selection]
Initial value
02h
Refer to the following for setting values.
Page 87 [Pr. PD03_Input device selection 1L (*DI1L)]

[Pr. PD05_Input device selection 2L (*DI2L)]

Initial value
00002100h
Select the device to be assigned to the input signal of the CN3-16 pin.
[Pr. PD05.0-1_Position control mode - Device selection]
Initial value
00h
Refer to the following for setting values.
Page 87 [Pr. PD03_Input device selection 1L (*DI1L)]
[Pr. PD05.2-3_Speed control mode - Device selection]
Initial value
21h
Refer to the following for setting values.
Page 87 [Pr. PD03_Input device selection 1L (*DI1L)]

[Pr. PD06_Input device selection 2H (*DI2H)]

Initial value
00002021h
Select the device to be assigned to the input signal of the CN3-16 pin.
[Pr. PD06.0-1_Torque control mode - Device selection]
Initial value
21h
Refer to the following for setting values.
Page 87 [Pr. PD03_Input device selection 1L (*DI1L)]
1 SERVO PARAMETER DETAILS
88
1.5 I/O setting servo parameters group ([Pr. PD_ _ ])
Setting range
Refer to the relevant detail No.
Setting range
Refer to the text
Setting range
Refer to the relevant detail No.
Setting range
Refer to the text
Setting range
Refer to the text
Setting range
Refer to the relevant detail No.
Setting range
Refer to the text
Ver.
Refer to the relevant detail No.
Ver.
A0
Ver.
Refer to the relevant detail No.
Ver.
A0
Ver.
A0
Ver.
Refer to the relevant detail No.
Ver.
A0