Syslog Logging; Figure 311 Examples Of Error And Information Messages; Figure 312 Menu 24.3.2: System Maintenance: Syslog Logging; Table 199 System Maintenance Menu Syslog Parameters - ZyXEL Communications ZyWall 70 User Manual

ZyWALL 70 User's Guide

Figure 311 Examples of Error and Information Messages

39.4.2 Syslog Logging

The ZyWALL uses the syslog facility to log the CDR (Call Detail Record) and system
messages to a syslog server. Syslog and accounting can be configured in Menu 24.3.2 -
System Maintenance - Syslog Logging, as shown next.

Figure 312 Menu 24.3.2: System Maintenance: Syslog Logging

You need to configure the syslog parameters described in the following table to activate syslog
then choose what you want to log.

Table 199 System Maintenance Menu Syslog Parameters

FIELD
Syslog:
Active
Syslog Server IP
Address
516
52 Thu Jul 1 05:54:53 2004 PP05
code=15
53 Thu Jul 1 05:54:53 2004 PINI
54 Thu Jul 1 05:54:56 2004 PP05 -WARN
3: link up
55 Thu Jul 1 05:54:56 2004 PP0d
<0>
57 Thu Jul 1 05:54:56 2004 PP0d
<1>
58 Thu Jul 1 05:54:56 2004 PINI
Times
59 Thu Jul 1 05:54:56 2004 PINI
60 Thu Jul 1 05:55:26 2004 PSSV -WARN
61 Thu Jul 1 05:56:56 2004 PINI
62 Thu Jul 1 07:50:58 2004 PINI
63 Thu Jul 1 07:53:28 2004 PINI
Clear Error Log (y/n):
Menu 24.3.2 - System Maintenance - Syslog Logging
Syslog:
Active= No
Syslog Server IP Address= 0.0.0.0
Log Facility= Local 1
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Press [SPACE BAR] and then [ENTER] to turn syslog on or off.
Enter the server name or IP address of the syslog server that will log the selected
categories of logs.
ERROR Wireless LAN init fail,
INFO Channel 0 ok
SNMP TRAP 3: interface
INFO LAN promiscuous mode
INFO LAN promiscuous mode
INFO Last errorlog repeat 1
INFO main: init completed
SNMP TRAP 0: cold start
INFO SMT Session Begin
INFO SMT Session End
INFO SMT Session Begin
Chapter 39 System Information & Diagnosis