Wan Setup; Figure 2-9 Menu 1.1 - Configure Dynamic Dns; Table 2-5 Configure Dynamic Dns Menu Fields - ZyXEL Communications Prestige 316 User Manual

Prestige 316 Broadband Sharing Gateway / Wireless LAN
The fields for Configure Dynamic DNS setup are as shown next.
FIELD
Service Provider Toggle using [space bar] to choose the name of your dynamic
DNS client.
Active Toggle using [space bar] to choose to activate or not.
Host Enter the domain name assigned to your Prestige by your
dynamic DNS client.
EMAIL Enter your email address here.
USER Enter your username.
Password Enter the password assigned to you.
Enable Wildcard Your Prestige supports the DYNDNS Wildcard feature. This
feature is N/A when you chose DDNS client as your service
provider.
NOTE: The Prestige supports only basic DDNS and the login and password may
not be secure. If you have a private WAN IP address, it is recommended that you
2.9

WAN Setup

This section describes how to configure the WAN using Menu 2 – WAN Setup. From the main menu,
enter 2 to open Menu 2.
2-12
Menu 1.1 – Configure Dynamic DNS
Service Provider= WWW.DDNS.ORG
Active= No
Host=
EMAIL=
USER=
Password= ********
Enable Wildcard= N/A
Press ENTER to Confirm or ESC to Cancel:
Figure 2-9 Menu 1.1 – Configure Dynamic DNS
Table 2-5 Configure Dynamic DNS Menu Fields
DESCRIPTION
do not use this service as it may lead to problems.
WWW.DDNS.ORG/
WWW.DynDNS.ORG
p316.ddns.org
yourmailserver
N/A / Yes/No
Hardware Installation and Initial Setup
EXAMPLE
No/Yes
yourmail@