Creating Files - YASKAWA YRC1000 Instructions Manual

3 Remote laser welding position registration files

3.1 Creating files

3.1. Creating files
(1) Select {OPTION}  {LASER RECORD POS}.
(2) Select {DATA}  {CREATE}.
(3) In the window for registering a new position file,
enter the desired file number and the number of
points. The maximum values are as follows.
File number: 999
Number of points: 999
* Note that the number of points for all files
combined must be no more than 2,000 points.
(4) Create a new file with the desired file number
and number of points.
(5) Place the cursor over the registration status
(registered or not) and press [ENTER]. The remote
laser record position window will appear.
• Searching for a file number
In this window, place the cursor over the file
number part and press [ENTER] to become able to
enter numbers into the box. Enter the desired file
number and press [ENTER].
3-21
HW1486273
21 / 95