Copying Paths; Pasting Paths - YASKAWA YRC1000 Instructions Manual

4 Remote laser welding condition registration files

4.10 Copying paths

4.10. Copying paths

4.11. Pasting paths

(1) To copy the path displayed, in the remote laser
record conditions window for the path being displayed,
select {EDIT}  {COPY PATH}.
(2) The data for the path being displayed will be
copied.
(1) To paste a copied path, from the remote laser
record conditions window, open the point window
where you want to paste the path and select {EDIT} 
{PASTE PATH}.
(2) A dialog box will appear with the message, "Paste?"
Click {YES}.
(3) The data for the path displayed will be overwritten
with the copied path.
* If nothing has been copied, the paste function will not
operate.
4-50
HW1486273
50 / 95