Erasing Remote Laser Welding Condition Registration Files - YASKAWA YRC1000 Instructions Manual

4 Remote laser welding condition registration files

4.13 Erasing remote laser welding condition registration files

4.13. Erasing remote laser welding condition registration files
(1) From the remote laser record conditions file
selection window, place the cursor over the
registration file to erase, then select {EDIT} 
{CLEAR FILE}.
(2) A dialog box will appear with the message,
"Welding line is cleared. OK?" Click {YES}.
(3) The file's content will be erased and the
registration status will change from [REGIST] to
[UNREGI].
4-52
HW1486273
52 / 95