Chapter 7: Preparations for network
Console and management connections
The left front panel of the switch contains the Status LEDs, Base Unit switch, Console port,
Out of Band Management port, and a USB 2.0 port.
Figure 23: Console and management ports
See the following sections for more information.
Console port
The console port is the RJ45 port with a blue border outline. The port is labelled console, and
can be used to establish a management terminal connection to the switch. You can use an
RJ45 to DB-9 cable, or a DB-9 to RJ45 adapter to connect the switch console port to your
management terminal. The maximum length of a console cable is 25 feet (8.3 meters). The
following figure and table describe the RJ45 console port pin-out information. You can use the
VSP 7000 installation
connectivity
April 2012
45