Configuring Poe Interfaces - HIKVISION DS-9608NI-I8 User Manual

Network Video Recorder User Manual
Step 3 Set Adding Method to Manual.
Step 4 Enter the IP address, the user name, and password of administrator manually.
Step 5 Click OK.

4.2.3 Configuring PoE Interfaces

Purpose
When long-distance PoE transmission (100 to 300 m) is required, enable long distance
mode for the PoE channel.
Step 1 Go to Camera > Camera > PoE Settings.
Step 2 Enable or disable long network cable mode by selecting Long Distance or Short
UM NVR v4.xx 111717NA
Figure 4-2 Edit IP Camera
Plug-and-Play: The camera is physically connected to the PoE interface. Its
•
parameters cannot be edited. You can go to System > Network > TCP/IP to
change the IP address of the PoE port.
Manual: Add IP camera without a physical connection, via the network.
•
Distance radio.
Long Distance: Long-distance (100 to 300 meters) network transmissions
•
via PoE interface.
Short Distance: Short-distance (<100 meters) network transmission via PoE
•
interface.
40