Configure Poe Interface - HIKVISION DS-9600NI-I8 Series User Manual

Select Adding Method as Manual.
• Plug-and-Play: The camera is physically connected to the PoE interface. Its parameters cannot be
edited. You can go to System > Network > TCP/IP to change IP address of PoE port. .
• Manual: Add IP camera without physical connection via network.
Enter the IP address, the user name and password of administrator manually.
Click OK.

Configure PoE Interface

Purpose:
When it requires long-distance PoE transmission (100 to 300 m), you can enable long distance
mode for the PoE channel.
Go to Camera > Camera >PoE Settings.
Enable or disable long network cable mode by selecting Long Distance or Short Distance radio.
 Long Distance: Long-distance (100 to 300 meters) network transmissions via PoE interface.
 Short Distance: Short-distance (< 100 meters) network transmission via PoE interface.
Network Video Recorder User Manual
Edit IP Camera
51