Table of Contents
Advertisement
Chapter 3 PTZ Controls
3.1 Configuring PTZ Settings
Purpose:
Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should be done before you
control the PTZ camera.
Before you start:
Add a PTZ camera. For details, please refer to 2.4 IPC Settings.
Steps:
1. Enter the PTZ Settings interface.
Menu > Other Settings > PTZ
2. Choose the camera for PTZ setting in the Camera dropdown list.
3. Input the parameters of the PTZ camera.
All the parameters should be exactly the same as the PTZ camera parameters.
4. Click OK button to save the settings.
3.2 PTZ Control Panel
Right-click a PTZ camera and click PTZ on the popup right-click menu to enter the PTZ Control interface.
Mobile Network Video Recorder User Manual
Figure 3. 1 PTZ Settings
Figure 3. 2 PTZ Control Panel
37
Advertisement
Table of Contents
