Dodge ZB 2005 Service Manual page 708

ZB
OIL COOLER & LINES (Continued)
Fig. 63 Oil Cooler Line Quick Connect Fitting -
Disassembly
1 - QUICK CONNECT FITTING
2 - DUST CAP
3 - OIL COOLER LINE
4 - SPECIAL TOOL 9005
ASSEMBLY
(1) Align oil cooler line (3) with quick connect fit-
ting (1) while pushing straight into the fitting (Fig.
64).
(2) Push in on oil cooler line (3) until a "click" is
heard or felt (Fig. 64).
Fig. 64 Oil Cooler Line Quick Connect Fitting -
Assembly
1 - QUICK CONNECT FITTING
2 - CLIP
3 - OIL COOLER LINE
4 - DUST CAP
(3) Slide dust cap (4) down the oil cooler line (3)
and snap it over the quick connect fitting (1) until it
is fully seated and rotates freely (Fig. 64). Dust cap
(4) will only snap over quick connect fitting (1) when
the cooler line (3) is properly installed.
NOTE: If dust cap will not snap into place, repeat
assembly step #2.
ENGINE 9 - 47