Dodge ZB 2005 Service Manual page 286

ZB
SPARK PLUG CABLE (Continued)
Fig. 15 IGNITION CABLE ROUTING
1 - Fuel Test Port
2 - Fuel Rail
3 - Fuel Injector
4 - Spark Plug Cables
(5) Install Intake Manifold, refer to the Engine/
Manifolds/Intake Manifold for more information.
(6) Install Air Cleaner Assembly, refer to the
Engine/Air Intake section for more information.
(7) Connect the negative battery cable.
(8) Use the DRBIII Scan Tool ASD Fuel System
Test to pressurize the fuel system. Check for leaks.
STARTER BUTTON
REMOVAL
(1) Remove the center bezel (Fig. 16) (Refer to 23 -
BODY/INSTRUMENT
PANEL CENTER BEZEL - REMOVAL).
(2) Squeeze the tabs on the switch (Fig. 17).
PANEL/INSTRUMENT
IGNITION CONTROL 8I - 9
Fig. 16 START BUTTON LOCATION
Fig. 17 START BUTTON CLIPS