Dodge ZB 2005 Service Manual page 865

21 - 14 MANUAL TRANSMISSION - T56
MANUAL TRANSMISSION - T56 (Continued)
(38) Remove input shaft from adapter (Fig. 36).
Fig. 36 INPUT SHAFT
1 - BEARING
2 - INPUT SHAFT
3 - ADAPTER
MAINSHAFT
CAUTION: Mainshaft snap rings are not inter-
changeable.
(1) Remove and discard mainshaft O-ring (Fig. 37).
NOTE: O-ring is used to hold mainshaft bearing in
place during manufacturing only.
(2) Remove rear mainshaft bearing (Fig. 38).
Fig. 37 MAINSHAFT O-RING
1 - BEARING
2 - MAIN SHAFT
3 - O-RING
4 - FIRST GEAR
Fig. 38 MAINSHAFT BEARING
1 - BEARING
2 - MAINSHAFT
ZB