Configuring Maintenance Warnings; Servicing The Air Filter In The Door - Waters ACQUITY UPLC Overview And Maintenance Manual

Warning:
modules. The components within are not user-serviceable.
Notice:
electrical assembly while electrical power is applied to a module. To completely interrupt
power, set the on/off switch to the "off" position, and then disconnect the power cord
from the ac source. Wait 10 seconds thereafter before disconnecting an assembly.

3.6 Configuring maintenance warnings

Maintenance counters, if available for a particular component, provide information about real-time
usage that can help you determine when to schedule routine maintenance for specific
components. You can specify usage thresholds and maintenance warnings that alert you when a
component reaches a specified threshold. Thus you can minimize unexpected failures and
unscheduled downtime during important work. For information explaining how to specify
maintenance warnings, consult the Waters console Help.

3.7 Servicing the air filter in the door

Required tools and materials
• Mild detergent and water
• Air filter (if replacing)
To service the air filter:
1. Open the solvent manager's door.
2. Slide the air filter up and out of the frame inside the door.
To avoid electric shock, do not remove protective panels from system
To avoid damaging electrical components and circuitry, do not disconnect an
August 8, 2016, 715005050 Rev. C
Page 46