Christie GS Series Service Manual page 73

2. Remove the main board and I/O board.
See Replacing the main board and I/O board
3. Remove fans 5, and 7.
See Replacing fans 5 and 7
4. Remove the complete engine.
See Replacing the complete engine
5. To remove fan 10, remove the four M3 screws with a Phillips #1 screwdriver securing the fan.
6. To remove fan 4, remove the seven M3 screws with a Phillips #1 screwdriver securing the fan.
7. Replace the affected fan.
8. To re-install, follow these steps in reverse order.
GS Series 1075 Service Manual
020-001236-02 Rev. 1 (12-2019)
on page 83.
on page 70.
on page 80.
Ventilation and cooling
Fan 10
Fan 4
73