Christie GS Series Service Manual page 68

See Replacing the main board and I/O board
3. Remove fans 5, and 7.
See Replacing fans 5 and 7
4. Remove the laser driver board.
See Replacing the laser driver board
5. Remove the complete engine.
See Replacing the complete engine
6. Remove the power supply.
See Replacing the power supply
7. Remove the harnesses from the clips.
8. Remove the fans 4 and 10.
See Replacing fans 4 and 10
9. Remove the elevator feet from the bottom cover.
See Replacing a projector's foot
10. Remove the one mylar.
11. Remove the four M3 screws with a Phillips #1 screwdriver securing the blue LD cover and red
LD cover.
GS Series 1075 Service Manual
020-001236-02 Rev. 1 (12-2019)
on page 83.
on page 70.
on page 90.
on page 80.
on page 77.
on page 72.
on page 69.
Projector covers and feet
68