Running A 3D Sync Out Port Performance Test; Running A Remote Port Performance Test - Christie GS Series Service Manual

1.Connect the projector and DVD player using a toaxil cable.
2.Select the signal source 3G-SDI.
The image of DVD player generator is projected.

Running a 3D SYNC out port performance test

ID Part name
1 Test equipment
2 Test signal
3 Inspection item
4 Inspection distance
5 Criteria
To perform the 3D SYNC out port performance test, complete the following steps.
1.Connect the projector and RF emitter using a BNC cable.
2.Wear the 3D RF glasses.
3.Select the signal source 3D SYNC.
The 3D image is projected.

Running a remote port performance test

ID Part name
1 Test equipment
2 Test signal
3 Inspection item
4 Inspection distance
5 Criteria
To perform the remote port performance test, complete the following steps.
1.Connect the projector and remote controller using a audio cable.
2.On the IR remote, press Menu.
The image of on-screen display menu is projected.
GS Series 1075 Service Manual
020-001236-02 Rev. 1 (12-2019)
Description
3D RF glasses, RF emitter
1080p@60Hz
3D SYNC out port performance test
1.8 to 2.2 m
No abnormal color performance, line distortion, or noise exist on the screen
Description
Remote controller
None
Wired remote port performance test
1.8 to 2.2 m
No abnormal line distortion or noise exist on the screen
Service setups
33