Christie GS Series Service Manual page 81

6. Unplug the six connectors from the blue laser bank.
7. On the laser driver board, disconnect three harnesses.
8. To remove the complete engine, remove 11 M3 screws with a Phillips #1 screwdriver.
9. Replace the complete engine.
10. To re-install, follow these steps in reverse order.
GS Series 1075 Service Manual
020-001236-02 Rev. 1 (12-2019)
Black
Purple
Brown
Central laser bank
TEC
Black
Purple
Brown
Red laser bank
Optics
81