Removing The Thermal Switch - Christie GS Series Service Manual

See Replacing the complete engine
7. Loosen the five M3 captive screws with a Phillips #1 screwdriver securing the power supply
cover shielding.
8. To remove the interlock switch, unplug the connector for the interlock switch cable.
9. Replace the interlock switch.
10. To re-install, follow these steps in reverse order.

Removing the thermal switch

The thermal switch prevents the projector from operating when the temperature of engine is
overheated.
1. Remove the top cover.
See Removing the top cover
2. Remove the main board and I/O board.
See Replacing the main board and I/O board
3. Remove the front cover.
See Removing the front cover
4. Remove the fan 5.
See Replacing fans 5 and 7
GS Series 1075 Service Manual
020-001236-02 Rev. 1 (12-2019)
on page 80.
on page 63.
on page 83.
on page 65.
on page 70.
Electronics
76